Ultrasonic Metal Spot Welding Machine for Lithium Cell
Description:
Ultrasonic metal spot welding is a special method of connecting the same metal or dissimilar metals by using the mechanical vibration energy of ultrasonic frequency. When the metal is ultrasonically welded, it neither transfers current to the workpiece nor applies a high-temperature heat source to the workpiece, but it converts mechanical energy into internal energy, deformation energy, and limited temperature rise under static pressure. Solid-phase welding occurs when the two base materials reach recrystallization temperature. Therefore, it effectively overcomes the phenomena of spatter and oxidation during resistance welding.
Specification:
Item No. | HS-2030A | HS-2040A | HS-2050A |
Power | 3000Watt | 4000Watt | 5000Watt |
Frequency | 20kHz | 20kHz | 20kHz |
Working air pressure | 0.05-0.6MPa | 0.05-0.6MPa | 0.05-0.6MPa |
Weight | 55kgs | 60kgs | 88kgs |
Voltage | 220V ±20%, 50/60Hz | 220V ±20%, 50/60Hz | 220V ±20%, 50/60Hz |
Advantage:
1. Ultrasonic metal welding is a process that is close to cold working. The welding material does not need to be melted and does not change the metal characteristics.
2. The electrical conductivity is excellent after welding, and the resistivity is extremely low or close to zero.
3. Low requirements on welded metal surfaces, no need to clean or scrape off the oxidation or plating layer in advance.
4. No need for any consumable materials such as flux, gas, and auxiliary solder.
5. There is no need to melt the welded parts, there is only a short temperature rise at the welding area, and very little energy can be used to weld different non-ferrous metal materials.
6. Atomic interdiffusion is used as the welding principle to achieve true metal bonding.
7. It is completely pollution-free, and no sparks, arcs, fumes, etc. are generated during welding, which is an environmentally friendly welding technology.
8. The equipment is easy to operate and easy to grasp, and the safety of the operator,
9. The welding speed is extremely fast, and the welding cycle is usually within one second.
10. The welded parts have an extremely long service life.
Application:
Industries: batteries, new energy, solar energy, aerospace, military, glasses, power motors, super capacitors, etc.
Metal: copper, aluminum, stainless steel, nickel, gold, silver and other non-steel metal.
Hot Tags: strong ultrasonic metal spot welding machine for lithium cell, China, manufacturers, suppliers, factory