20kHz Aluminum Material Ultrasonic Transducer with Booster
♦ High mechanical quality
♦ Piezoelectric element offer a high speed of vibration.
♦ Having steady output amplitude even the load markedly changed. ♦ Extended using temperature, ensuring good amplitude linearity
♦ Bolt-on mounting gives the fast, easy installation and high reliability.
♦ easy for assembling
♦ good heat resistance
♦ large range of working temperature
♦ low resonance impedance and heat productivity
♦ good construction
♦ fastened by bolt
Ceramic sheet diameter: 60mm
Number of ceramic pieces: 4pcs
Resistance (Ω) <20
Connection thread: M16 * 1
The ultrasonic vibrator should be placed in a dry place to prevent the ultrasonic vibration from vibrating the mover, which will affect the normal work. If the ultrasonic vibrator is damp, put it into the oven and set it to dry at about 100 °C for 2 hours or use a hair dryer to remove moisture until the resistance is normal;
Ultrasonic vibrator degumming, the power output of the ultrasonic power supply is normal, but because the vibrator and the vibrating surface are not well connected, the vibrator will be burned if working for a long time. Ultrasonic vibrator degumming should be repaired or replaced by a professional ultrasonic manufacturer.
Shipping and Payment: