35kHz ultrasonic transducer with Titanium alloy booster
The ultrasonic vibrator is composed of an ultrasonic transducer and an ultrasonic boosterto form an ultrasonic vibration system. Ultrasonic transducer is a device that can convert high-frequency electrical energy into mechanical energy. Ultrasonic horn is a passive device that does not generate vibration. It only changes the amplitude of the vibration input from the ultrasonic transducer and then transmits it. Impedance transformation.
The ultrasonic transducer can generate regular vibration under the excitation of a suitable electric field, and its amplitude is generally about 10 μm. Such an amplitude is not enough to directly complete the welding and processing steps. Therefore, the transducer links a properly designed ultrasonic booster, and the amplitude of the ultrasonic wave can be varied within a wide range, as long as the material strength is sufficient, the amplitude can exceed 100 μm.
● Not used for more than one week, please cover with dust jacket (plastic bag);
● Except that the lifting screw has received lubricating oil before leaving the factory, no other oil agent is required in other parts;
● Regularly check the internal vibrator output line for wear;
● The appearance is dusty. Please wipe it with a clean cloth. Dry the compressed air every six months. Do not use various fluxes when cleaning the side plates and surfaces of the welder. Use a neutral detergent and gently rub. test;
● When the water filter reaches 13 water level, please remove the water;
● Every time the welder is used for one month, the sliding part should be cleaned and reapplied with high-quality grease;
● Always pay attention to the safety of the machine position.
Shipping and Payment: