Description:
The ultrasonic transducer can generate regular vibration under the excitation of a suitable electric field, and its amplitude is generally about 10 μm. Such an amplitude is not enough to directly complete the welding and processing steps. Therefore, the transducer links a properly designed ultrasonic booster, and the amplitude of the ultrasonic wave can be varied within a wide range, as long as the material strength is sufficient, the amplitude can exceed 100 μm.
Specification:
Frequency: 15khz
Power: 2600w
Ceramic sheet diameter: 60mm
Number of ceramic pieces: 4pcs
Capacitance (pf):9000-13500
Resistance (Ω) <20
Connection thread: M16 * 1
Common malfunctions:
The ultrasonic vibrator should be placed in a dry place to prevent the ultrasonic vibration from vibrating the mover, which will affect the normal work. If the ultrasonic vibrator is damp, put it into the oven and set it to dry at about 100 °C for 2 hours or use a hair dryer to remove moisture until the resistance is normal;
Ultrasonic vibrator degumming, the power output of the ultrasonic power supply is normal, but because the vibrator and the vibrating surface are not well connected, the vibrator will be burned if working for a long time. Ultrasonic vibrator degumming should be repaired or replaced by a professional ultrasonic manufacturer.
Factory workshop:
Packing :
Shipping and Payment: