How to adjust the level of ultrasonic mold
In ultrasonic welding, the level of ultrasonic mold is an important factor that affects the quality of product welding. If the level is not adjusted properly, sample damage, flashing and other errors will occur. Let me talk about how to adjust the level of ultrasonic mold to achieve the best Good welding effect.
The method of ultrasonic mold level adjustment is as follows:
first:
1. Loosen the level adjustment nut of the flange of the ultrasonic transducer, turn the handle of the middle body seat to pressurize the ultrasonic welding head on the horizontal bottom mold, and fine-tune the periphery of the ultrasonic welding head to fit the bottom mold more closely to achieve a complete fit level. state.
2. After the ultrasonic welding head is fully fitted with the bottom mold, symmetrically screw on the plane adjustment screws to tighten them, and lock the base to prevent the mold from displacing.
When the direction of the ultrasonic mold is not consistent with the direction of the base, there is no way to weld plastic products. First, adjust the direction of the ultrasonic welding head to make it completely consistent with the direction of the base.
1. Put the plastic product to be welded on the base, make it match with the base, and loosen the four plane adjustment screws.
2. Adjust the position of the middle body seat to keep a slight distance from the workpiece when the ultrasonic welding head is lowered.
3. Rotate the ultrasonic welding head to be in the same direction as the base. After the direction adjustment is completed, the ultrasonic welding head is still in a descending state, and then adjust the level of the ultrasonic welding head.