30kHz Ultrasonic Plastic Cutting Machine Titanium Alloy Blade

The ultrasonic plastic cutting knife is directly loaded into the ultrasonic energy on the cutter, the cutter will become a knife with ultrasonic cutting. In cutting materials, the materials are mainly softened and melted by ultrasonic energy. The cutting edge of the cutter plays the role of slit positioning, ultrasonic energy output, and separation of materials.


30kHz Ultrasonic Plastic Cutting Machine Titanium Alloy Blade 


   


30khz ultrasonic cutting machine (14)

30khz ultrasonic cutting machine (21)

30khz ultrasonic cutting machine (22)


Description:


Ultrasonic Cutters are small in size and do not require large installation areas. Special equipment is not required for the installation. Ultrasonic Cutters are small enough to be hand-held for many operations.

Ultrasonic Cutters can also be attached to automated machinery arms. Although they may not be familiar to you, they play an active role in the manufacturing processes of various industrial products which we use daily. 


Specification:


Model

HSPC30

Frequency

30KHZ

Output Power

500W

Generator

Digital generator, 155 x 265 x 170mm

Handle

Φ32×170

Size of cutter

Blade replaceable

Length of cable

3M

Outer skin

Aluminum

Weight

8KG

Voltage

220V / 110V

Accessory

Foot switch1pc;
Cut blade 25pcs;
1.5mm special hex wrench 1pc;
Screw M3×4L 2pcs

Material of cutter

Magnalium alloy, titanium alloy, stainless steel


Applications:

 

Thermo-plastics: plate, sheet, film and laminated material

Carbon fibers, natural fibers or Synthetic fibers

Composite material: polyethylene fibe, molded articles containing carbon or glass fibers

Rubber: vulcanized latex, non-vulcanized latex, sheeting material, and tube

Repair of printed circuit board copper foil

ABS、PP、PE ..... other organic plastic sheet less than 5mm

Automotive carpets and ceilings


Advantages:

 

1. Compatible with most thermoplastics, can be used for many different types of materials

2. Creates finely finished and structured objects

3. Emits less heat compared to other industrial cutting methods

4. Small footprint, easy to install, easy to operate and carry, suitable for automated assembly line

5. Cost-effectiveness and increased consistency at the cutting surface

6. Clean, precise cuts and edges

7. Energy efficient and low maintenance and easy to clean

8. Clean and Eco-Friendly cutting,do not emit noise, smoke and cause air contamination.

9. Compact equipment with a wide range of application

  

Package pictures:

1569227196(1)

1569227179(1)

Factory workshop:


f8817f17615d2e4c2a026c4b8abfe25

3

Hot Tags: 30khz ultrasonic plastic cutting machine titanium alloy blade, China, manufacturers, suppliers, factory