Ultrasonic Metal Welding For Solar Panels 20K
Description:
Ultrasonic metal welding uses high frequency vibration waves to transfer to the metal surface to be welded. Under pressure, the two metal surfaces rub against each other to form the fusion between the molecular layers.
Specification:
| Item No | QR-G2030A |
| Power | 3000W |
| Air Pressure | 0.05-0.9MPa |
| Frequency | 20KHZ |
| Voltage | 380V |
| Dimension of device | Customized |
| Dimension of Generator | 540*380*150mm |
| Working Mode | Continuous |
| Welding Speed | 2-15m/min |
Advantage:
1. The welding material is not fusion, it is not a fragile metal.
2. Good electrical conductivity after welding, low resistivity or close to zero.
3. Low requirements for welding metal surfaces, oxidation or plating may be welded.
4. Short welding time, no flow, gas, welding.
5. Spark-free welding, environmental protection and safety.
Application:
The cables fuse together, forming one and more cables merge together.
The copper sheet of the lithium battery and the polymer sheet is fused with the nickel plate and the aluminum foil fuses with the aluminum plate.
Nickel metal hydride battery nickel metal hydride nickel mesh and mutual fusion nickel piece and mutual fusion nickel piece.
The cables are fused with various electronic components, contacts and connectors.
A variety of automotive appliances supplies oversized heat dissipation seats, heat exchange fins, mutual fusion honeycomb core.
Electromagnetic switch, fuseless switch and other high current contacts, mutual fusion of different metal sheets.
The sealing tail of the metal pipe, water and air can be cut hermetically