Ultraweld Rolling Welder 20khz 2200w

Ultrasonic metal welder is developed and manufactured by Hangzhou Altrasonic Technology Co., Ltd, which is specifically used to weld aluminum foil and other metals assembly parts.

Ultraweld Rolling Welder 20khz 2200w



Ultrasonic energy has been used to join metal materials for decades. In ultrasonic metal welding, dissimilar materials are joined together without the use of applied heat or electric current passing through components. 

Ultrasonic energy can weld through contaminates to create a clean seal while providing increased quality and control. To achieve a high-quality seal, one part is held stationary while the second part is compressed beneath a vibrating horn. The material reaches a plastic state where molecules mix between the two parts, bonding the materials.  


Operating Frequency :      20 ±1KHz;

Maximum Ultrasonic Output Power:  2200w

Welding Rate:    4-8m/min (According To the Thickness Of   The Material)

Welding Thickness of Beaten Aluminum:      0.2-0.5mm(According  To the Quality Of The Material)

Diameter of Horn:   Dia  51mm

Operating Mode:     Automatic, Manual Test

Operating Pneumatic Pressure :  0.2-0.6Mpa

Power:   AC220V±5% ,50Hz±1%


Generator :  450×600×160mm3

Stand:   400×330×220 mm3

Operating Ambient Temperature:             0-50℃

Motor:      Three Phase AC 220V Conversion Motor  (51KGV20)


Hot Tags: ultraweld rolling welder 20khz 2200w, China, manufacturers, suppliers, factory