Ultrasonic Drilling Milling Machine BT/CAT/ISO/HSK
Description:
Ultrasonic assisted cutting is used for Hard and brittle materials such as quartz glass and engineering ceramics have excellent properties such as high temperature resistance,In a vibration cycle, the effective milling time of the tool is very short, and the tool is completely separated from the workpiece and chips more than 80% of the time. The tool is in intermittent contact with the workpiece and chips, which reduces the friction of the tool, greatly reduces the heat generated, and significantly reduces the milling force, which avoids the "give the tool" phenomenon in ordinary milling, and does not produce chip edge .
Specification：
Frequency | 20 Khz |
Output Power | 1000 W |
Voltage | 220 V/110V |
Switch | Handle or foot switch |
Power Adjusting | Step or continuous |
Working Time Control | 24 Hours |
Weignt | 30 KG ( Determined by the size of the horn ) |
Generator | Digital Generator |
Advantages of ultrasonic vibration cutting
1. The cutting force is small, about 1/3-1/10 of the cutting force of ordinary tools.
2. High processing precision.
3. The cutting temperature is low, and the workpiece is kept at room temperature.
4. No built-up edge, small deformation of the workpiece and no burrs.
5. Low roughness, which can be close to the theoretical roughness value.
6. The "rigidization" of the machined parts, that is, compared with ordinary cutting, it is equivalent to increasing the rigidity of the workpiece.
Workshop：
Hot Tags: Ultrasonic Drilling Milling Machine BT/CAT/ISO/HSK, China, manufacturers, suppliers, factory