New Process 20Khz Ultrasonic Ceramic Machining
The transducer vibrates the sonotrode at low amplitudes and high frequencies. The sonotrode is usually made of low carbon steel. A constant stream of abrasive slurry flows between the sonotrode and work piece. This flow of slurry allows debris to flow away from the cutting area. The slurry usually consists of abrasive boron carbide, aluminum oxide or silicon carbide particles in a suspension of water (20 to 60% by volume). The sonotrode removes material from the work piece by abrasion where it contacts it, so the result of machining is to cut a perfect negative of the sonotrode's profile into the work piece. Ultrasonic vibration machining allows extremely complex and non-uniform shapes to be cut into the workpiece with extremely high precision.
|Resonance point amplitude||10um or more|
|Speed||30000 r / min or less|
|Matching tool||carbide end mill head Φ2-Φ13; disk cutter Φ50；|
1. Various kinds of materials especially fragile rigid material.
2. Application area: machining industry, machine tool equipment manufacturing.
3. Processing plane, groove, all kinds of form surface (such as spline, gear and thread) and special surface of mould.
1、High accuracy and fine finished are obtained depending upon the tool accuracy and grit size.
2、Simple in operation even a beginner can operate the machine with ease.
3、Products for standardized production, high reliability;
1、Q:What is the diameter of your drilling tool?
A:The diameter range of our drilling tool is 1mm to 13mm(according to custom’s application).
2、Q:Can i adjust the frequency on the your equipment?
A:You do not need to adjust the frequency, our digital generator will automatically tracking the frequency.
3、Q:Do you make grinding head welded diamond power?
A:Yes, there are concentrated diamond power on our ultrasonic grinding head for better performance.It needs change frequently for it’s a wearing part.
|注：可使用其他编辑器编辑内容后复制到填写框中 其他HTML编辑器 FCKHTML编辑器|