Hot Rivet Spot Welding Fixture For Car’s Front and Back Door Decoration Plate
Hot rivet spot welding fixture for car’s front and back door decoration plate is also called the left and right door anti-scratch strip assembly. The hot riveting and quick-change tooling is used to match the hot-melt non-standard equipment. Solder more products. Each set of hot riveting tools is equipped with a quick changeover car, which makes it easy to replace and improve efficiency.
There are 2 sets of quick-changing tooling ,and the left and right symmetrical parts are welded on each set of tools at the same time.
It has smooth surface, beautiful appearance, and strength to meet customer’s requirements after hot-melt welding.
There are 6 welding points in the front door and 12 welding points in the left and right symmetrical parts.
There are 5 welding points in the back door and 10 welding points in the left and right symmetrical parts.
It is to buckle each hollow column to buckle the car bright strip.
The riveting effect is good, and the depth of each point is adjustable.
There is no injury on the back after hot rivet spot welding.
The hot rivet head is made of beryllium bronze and is engraved according to the column.
The front door of the car is hot riveted and the film is sprayed to prevent the back of the welding product from being injured. There are pre-pressed, blown, hot riveting working.
Car back door hot riveting tool, the tightness of the film can be fine-tuned.