Specifications
Model | HS-1070-2z |
Frequency | 70khz |
Output power | 100watt |
Joint bolt | M4 |
Ceramic disc Diameter | 10 mm |
Quantity of Ceramic discs | 2 pcs |
Capacitance | 0.34~0.4 nf , |
Amplitude | 1um |
Application | Welding |
Description
The ultrasonic generator converts the power supply into a electrical signal. This signal is applied to piezoelectrical ceramics (included in the converter) that will convert this signal into mechanical oscillations
These oscillations will be amplified by the booster and converter, thus creating a hammer. The converter converts electricity into high frequency mechanical vibration. The active elements are usually piezoelectrics ceramics. The booster (optional) serves as an amplitude transformer. Amplitude magnification or reduction is achieved by certain design features or the geometrical shape of the booster.
The sonotrode, or horn, is the active part of the ultrasonic unit. It is in contact with the fabric and acts as a hammer against the counter-tool. This system will enable to melt the fibers within the fabric by mechanical action only (hammering), enabling to obtain a very clean and flexible melting without any burning or color change. The sonotrode and counter-tool design will be adapted to the operation to be performed
Service
We provide a wide range of high quality ultrasonic welding transducer, No matter what kind of transducer you are looking for,We can make sure that you can find one at here. it is by utilizing piezo-electric effect to convert electrical energy into mechanical energy.the bolt-on type can make sure that the transducer can produce stable ultrasonic when load changes.
