Precise Testing Ultrasonic Horn Analyzer

Precise Testing Ultrasonic Horn Analyzer

The proper frequency and impedance adjust is indispensable for all ultrasonic devices. The frequency depends mainly on dimensions (e.g.: length of the sonotrode) and the impedance of the quality of material used, assembly, and coupling of the acoustic sets’ parts. Deviations indicate the need for fine tuning, cleaning, re-gripping or re-assembly.
Chat Now

Product Details

Precise Testing Ultrasonic Horn Analyzer

ultrasonic impedance analyzer20.jpg


Description :

For ultrasonic components measuring instrument, the most important is the admittance chart, logarithmic graph of the two graphics (the two graphics is the main method of qualified qualified), and more than a dozen parameters: resonance frequency Fs, the maximum conductance Gmax, bandwidth F2-F1, anti-resonance frequency Fp, quality factor Qm, free capacitance CT, dynamic resistance R1, dynamic inductance L1, dynamic capacitance C1, static capacitance C0, effective electromechanical coupling coefficient Keff.


Product Featureportable,8inch screen,full touch screen
Measurement indexAll the parameters ,the graph
Measurement Accuracy< 0.5%
Measuremet Speed 5/S one pass (600scan point) adjustable
Frequency Accuracy±10ppm
Impedance Range1Ω~1MΩ
Frequency Step0.1Hz~any

Parameters and Graph:

ultrasonic horn analyzer.png



* Reduces ultrasonic equipment maintenance costs because it allows preventive maintenance

* Allows the quality control of ultrasonic transducers reducing technical assistance

*  Makes fast and accurate manufacturing of transducer possible

*  Easy operation

*  Can connect to PC operation for storage


Q:What is Fs and Fp means?

A:Fs means resonant frequency, Fp means anti-resonant frequency.

Q:What is C 0,C T,C 1 means ?

A:C o means static capacitance, C T means free capacitance,C 1 means dynamic capacity.

C T= C 1+C 0

Q: Is quality factor Qm the higher the better?

A:Not exactly right.At a certain range, the Qm higher,the ultrasonic efficiency and sensitivity will also higher.But if the Qm is too high, the transducer can not match the generator and will not work effective.