Portable Ultrasonic Horn Analyzer

Portable Ultrasonic Horn Analyzer

Easy Operation portable Ultrasonic Components Measuring For TRZ Horn and Ceramic Analysis Introduction: The Measuring instrument which can easily replace much more complex and more complicated, also many times more expensive instruments from Agilent/HP, as for instance: HP Impedance Gain-Phase.

 Portable Ultrasonic Horn Analyzer


     

 IMG_2611


IMG_2599

Description:


图片1.png



Main parameters: 


Item No.

HS70A

HS80A

HS520A

Frequency range

1KHz ~ 500KHz

1KHz ~ 1MHz

1KHz ~ 500KHz

Frequency accuracy

±10ppm

±10ppm

±10ppm

Impedance accuracy

< 1%

< 1%

< 0.5%

Impedance Range

0.1Ω to 1MΩ

0.1Ω to 1MΩ

0.1Ω to 1MΩ

Frequency Step

0.1 Hz to Any

0.1 Hz to Any

0.1 Hz to Any

Measuring speed

(equivalent 600 points scan)

10 sec/one pass

5 sec/one pass

5 sec/one pass

Application

Power Ultrasonic device

Piezoelectric ceramic

All ultrasonic products and components

Dimensions

350*200*150mm

350*200*150mm

240*190*100mm




Specification:


Impedance Analyzer

HS520A Newest

Measure Items

Resonance Frequency: Fs

Half Power Frequency: F1 and F2

Maximum real admittance at Fs: Gmax

Dynamic Resistance: R1

Anti resonance frequency: Fp

Mechanical quality factor: Qm

Free capacitance: CT

Dynamic inductance: L1

Dynamic capacitance: C1

Static capacitance: Co

electromechanical coupling coefficient: Keff and Kp

Maximum real impedance at Fp: Zmax

Measure Diagram

G,B-F

G-B (admittance circle coordinate)

R,X-F

R-X (impedance circle coordinate)

Z,phase-F

Y,phase-F

Z(Logarithm),phase-F

Dimensions : 240mm*190mm*100mm

Size of LCD Screen: 8-inch screen



Description:

 

For ultrasonic components measuring instrument, the most important is the admittance chart, logarithmic graph of the two graphics (the two graphics is the main method of qualified qualified), and more than a dozen parameters: resonance frequency Fs, the maximum conductance Gmax, bandwidth F2-F1, anti-resonance frequency Fp, quality factor Qm, free capacitance CT, dynamic resistance R1, dynamic inductance L1, dynamic capacitance C1, static capacitance C0, effective electromechanical coupling coefficient Kef



Testing Video:




Application:


This ultrasonic tool head analyzer is used in the test parameters to check that the equipment is in good condition. At the same time, it helps to understand and eliminate obstacles in the equipment.


1(1)2(1)3(1)

Hot Tags: portable ultrasonic horn analyzer, China, manufacturers, suppliers, factory

Previous: 5M Impedance Analyzer For Measuring Ultrasonic Device

Next: Easy Operation 1M-3M Ultrasonic Horn Analyzer