Portable Ultrasonic Analyzer Easy To Operate
Ultrasonic transducer: The admittance circle must not have a parasitic circle, the resonance frequency should be as close as possible to the design frequency, the dynamic impedance should be low, the quality factor Qm should be close to the design requirements, and the capacitance should match the circuit.
Piezoelectric ceramic sheet: The quality of the device can be judged directly from the admittance circular diagram and logarithmic coordinates. If the ceramic sheet has delamination or cracks, the logarithmic curve will have multiple peaks. Multiple parasitic small circles appear on the admittance circle diagram.
Measurement Index: All the parameters, the graph
Measurement Accuracy: <0.5%
Measurement Speed: 5s/one pass (600scan point)
Frequency Accuracy: ±10ppm
Phase Resolution: 0.15 degree
Environment Temperature: 10~40degree centigrade
Impedance Range: 1Ω~1MΩ
Frequency Step: 0.1kHz~any
Power Supply: AC100V~AC250V, 50~60kHz, 30W
Application: Ultrasonic device
It is small and easy to carry.
Ultrasonic transducers can be quality controlled, thereby reducing technical assistance.
It is a new generation of ultrasonic component analyzer that combines the advantages of previous equipment.
It is also very easy to use HS520A (by engineers or ordinary production workers).
The precision of impedance measurement is high.
Simple, easy to use, combination of indicators and graphics, accurate parameters, low price, and very good guidance for production.
Test data computer can be unlimited storage and printing and traceable data source