5Mhz Ultrasonic Impedance Analyzer
The TRZ Horn Analyzer determines the operation frequency of the item to be tested and its impedance and current with the touch of a button. It’s quick and easy. With this quick and easily retrieved information, the user can perform the quality control of transducers, tuning of sonotrodes and ultrasonic horns, preventive and corrective maintenance of acoustic sets and much more
|Product Feature||portable,8inch screen,full touch screen|
|Measurement index||All the parameters ,the graph|
|Measurement Accuracy||< 0.5%|
|Measuremet Speed||5/S one pass (600scan point) adjustable|
Parameters and Graph:
1. Tsinghua University and the Chinese Academy of Sciences Institute of Acoustics jointly developed technology.
2. Since 2001, our HS60A/70A series of products to the market has been 15 years , thousands of customers use in the industry, has become a matter of fact the ultrasound industry measurement standard.
3.Over the past 15 years, more than 200 colleges and universities have been using our instruments, because they often have more than 20,000 imported Agilent instruments, 4294A. Our instruments have been tested many times with imported Agilent instruments. It turns out that the results of our instruments are completely trustworthy.
4. Our instruments have been used by many German and US ultrasonic testing companies as test instruments. The instrument is the key to quality control.
Q: Can this analyzer connect to PC ?
A: Our ultrasonic impedance analyzer can connect to PC operation for storage, you can also check the operation video on our YTB:https://youtu.be/AY16fSjw8ZM
Q:We have many ceramic for testing, do you have holder for testing ceramic.
A:We have special fixture for holing ceramic, we will send the picture to you.
Q:What is the analyzer used for ultrasonic cleaning?
A:On the admittance circle diagram, there should be as little or no parasitic circle as possible. No parasitic circle. Impedance characteristics analysis and measurement can be performed on transducer manufacturing, incoming inspection, bonded transducers, and cleaning machines. The machine's overall measurement can be used to calibrate the machine's resonant frequency and electrostatic capacity. In order to match the power supply, it is possible to analyze the characteristics of the new resonance point, the impedance after water injection, the capacitance and the vibration mode of the complete machine.