Ultrasonic Piezoceramic Measuring Instrument
The TRZ Horn Analyzer determines the operation frequency of the item to be tested and its impedance and current with the touch of a button. It’s quick and easy. With this quick and easily retrieved information, the user can perform the quality control of transducers, tuning of sonotrodes and ultrasonic horns, preventive and corrective maintenance of acoustic sets and much more
1. Large screen, full-screen touching, making the HS520A both HS70A-P(computer version) operating experience, and no cumbersome with a sense of computer operation.
2. Relies on the new powerful ARM processor data processing capacity, HS520A measurement accuracy is much higher than HS70A-D (with display version), can achieve HS70A-P(computer version) level.
3. Full-screen touch operation is more user-friendly, no longer need HS70A-D(own display version) a large number of physical buttons, thus operating instruments becomes extremely simple, the production size smaller, lighter and more portable.
4. Connecting the computer to operate as HS70V-P. The software is fully compatible, the user are no longer familiar with software operation.
5．HS520A was taken into account the needs of automated production line operation in the development time, reserved the 232interface with PLC communication and IO communication interface (replay input and output)
6. HS520A operation is no longer based on Windows system, with long-term reliable operation capacity in the production line.
* Sonotrode tuning
* Test of transducers
* Test of acoustic sets
* Test of piezo ceramics
* Predictive maintenance
Shipping Term:By express,by air,by ocean and so on.
Leading Time:Quick production leading time and fast delivery.Usually 1-3days if we have in stock.
Q:How to judge the defects for booster and assemble?
A:For the design, processing and assembly of the horn or booster , whether it is reasonable or flawed, it can be clearly seen directly on the guide circle diagram.
Q:What is the analyzer used for ultrasonic welding machine?
A:For the production and processing of the ultrasonic welding machine, the results of the admittance circle are used to analyze the state of the welding machine. Through the analysis of the parameters and figures, the problems of the welding machine are found.
Q:What is the analyzer used for ultrasonic cleaning?
A:On the admittance circle diagram, there should be as little or no parasitic circle as possible. No parasitic circle. Impedance characteristics analysis and measurement can be performed on transducer manufacturing, incoming inspection, bonded transducers, and cleaning machines. The machine's overall measurement can be used to calibrate the machine's resonant frequency and electrostatic capacity. In order to match the power supply, it is possible to analyze the characteristics of the new resonance point, the impedance after water injection, the capacitance and the vibration mode of the complete machine.