1-500Khz Impedance Analyzer For Ceremic

The proper frequency and impedance adjust is indispensable for all ultrasonic devices. The frequency depends mainly on dimensions (e.g.: length of the sonotrode) and the impedance of the quality of material used, assembly, and coupling of the acoustic sets’ parts. Deviations indicate the need for fine tuning, cleaning, re-gripping or re-assembly.

1-500Khz  Impedance Analyzer for Ceremic


ultrasonic impedance analyzer03ultrasonic impedance analyzer17ultrasonic impedance analyzer16

Description :

The impedance analyzer can accurately measure in the impedance range and wide frequency range. It uses different conductive effects of objects. When a fixed low-level current is applied to the surface of the object, the various components of the object, device parameters and Performance is good and bad.




The impedance analyzer can be measured and rated to match the circuit.

For piezoelectric ceramic sheets, the advantages and disadvantages of the device can be judged directly from the admittance chart and the logarithmic coordinates. If there isdelamination inside the ceramic sheet or cracks appear, the logarithmic curve will appear multi-peak, and multiple appear on the admittance chart. Parasitic small circle.


(Note: There are differences in the relevant characteristic data of different manufacturers)

1, the basic accuracy: 0.05 [%]

2. Frequency accuracy: ±0.005 [%]

3. Measurement parameters: Z, L, C, R, Q, D, Y, G, B, X

4, output: 10mV to 1V rms, 200uA to 20mA rms

5, display format: serial / parallel circuit, or two-pole

6, graphics analysis mode: optional two parameters according to frequency and DC bias source scanning

7, meter mode: can be used as a standard LCR meter

8, to be tested: component connection

9, there are many optional accessories for different testing needs.

10, consumption factors: ± 0.0005 (1 + D * D2)

11, quality factors: ± 0.05 [%] (Q + 1 / Q)


* Operation

* Sonotrode tuning

* Test of transducers

* Test of acoustic sets

* Test of piezo ceramics

* Predictive maintenance



1. Large screen, full-screen touching,

2. Relies on the new powerful ARM processor data processing capacity

3. Full-screen touch operation is more user-friendly

4.Connecting the computer to operate

Hot Tags: 1-500khz impedance analyzer for ceremic, China, manufacturers, suppliers, factory