Ultrasonic Automatic Tracking Frequency Generator

Description: The principle of ultrasonic welding by the ultrasonic digital generator 50/60 Hz current is converted into 15,20,30 or 40 kHz energy, even reach 70khz. The high frequency electrical energy is converted by the transducer is again converted into a mechanical movement of the same...

Ultrasonic Automatic Tracking Frequency Generator

20khz 305mm ultrasonic food cutter  (1).jpg


Ultrasonic generator adopts the world's leading helicial oscillating circuit structure, which increases the output power by more than 10% compared with the self-oscillating oscillating circuit structure. The ultrasonic amplifying circuit uses a linear amplifying circuit and a switching power supply circuit.

Switching power supply circuit advantages: high conversion efficiency, so high-power ultrasonic power supply adopts this form.

The advantages of the linear power circuit: It does not strictly require circuit matching, allowing the operating frequency to continuously change rapidly.







What should you watch out for before power adjustment?

1. Note: Firstly, check whether the generator frequency is the same as the transducer frequency, such as 28KHZ and 40KHZ.

2. Correctly connect the positive and negative poles of the load (Remarks: Normally, the negative pole communicates with the washing machine tank or the plate of the vibration plate).

3. The ultrasonic generator is correctly connected to the 220V power supply, and the power supply must be reliably grounded.

Hot Tags: Ultrasonic Automatic Tracking Frequency Generator, China, manufacturers, suppliers, factory