60Khz Ultrasonic Digital Generator
The device that provides the electrical energy to power the ultrasonic transducers is known as the ultrasonic "generator." Basically, the ultrasonic generator converts electrical energy received from the power line into electrical energy with the proper frequency, voltage and amperage to power or "drive" the ultrasonic transducers. In most cases, the power line provides "Alternating Current" or AC at a voltage of 100 to 250 Volts and at a frequency of 50 or 60 Hz depending on location. The power requirements for driving ultrasonic transducers vary but, in general, the ultrasonic generator needs to provide the transducer with a signal at the frequency of intended operation and (usually) at a voltage significantly higher than that delivered from the power line.
Ultrasonic smart-card welding machine, high-speed production specifically for contactless smart card, double circles cards, bank cards, and is a key component to improve production efficiency, mainly applies to:
（1）Smart-card metal wire, chip implants, it means welding the wires and chips on the thin plastic plate.
（2）Smart Card PVC welding between thin cardboard.
（3）Spot welding of thin plastic, etc.
in use: use it indoor;
Peripheral environment temperature: 0 ℃- 40℃
The space for use: the distance of the other objects to the power case should not be less than 150mm, to the heat dissipation port should not be less than 200mm.