50Khz Optimized Ultrasonic Spray Atomizing Fluids Using Ultrasonic Vibration for Spraying Paint and Nano particle
The Ultrasonic Atomiser uses Ultrasonic energy (Low/Medium) to generate low velocity, gentle spray unlike the conventional atomizing nozzle which depends on pressure & high velocity motion to shear a fluid into small droplets. The fluid (Liquid) is dispensed to the atomizing probe by either gravity or low-pressure small pumps & atomize continuously or intermittently as per requirement. The sample can be accurately delivered to the target area & over spray is virtually eliminated thus, resulting in material savings. The atomizer can runs continuously or be programmed to pulse On & Off
Ultrasonic spray technology is used to coat practically any substrate shape, size or surface with uniform micron thick coatings, and even nanocoating thicknesses. In addition, ultrasonic technology is used for:
Ultrasonic nozzle benefits
· Non-clogging, repeatable performance
· Soft, low velocity mist of controlled, atomized spray with very little overspray
· Very defined lines as thin as 0.5mm
· Low maintenance system – ultrasonic nozzles have no moving parts, so no difficult adjustments of spray heads
Q:How about OEM ?
We provide OEM service ,and if you want printing your own logo on inner box , just send us your logo style ,and the we will give you the quotation
Q:What is precise type compress air shape for ?
A:Spray shape after aeration: focus on the straight line.
The low pressure air is ejected from the hole in the nozzle center, and the spray fluid is produced by the external catheter to the nozzle surface to produce fine liquid particles.
Q:What are the advantages of ultrasonic spray in Photoresist spray onto MEMS wafers?
A:In complex MEMs devices that have etched areas with high aspect ratios, it can be difficult to achieve uniform coverage along the top, side walls, and bottoms of deep grooves and trenches using spin coating techniques due to the high rate of spin needed to remove excess liquid. Ultrasonic spray techniques are used to spray uniform coatings of photoresist onto high aspect ratio MEMs devices and can minimize usage and overspray of photoresist.
Q:How do you control production quality ?
A: 3 times old test to confirm the products is well quality.
20 technician work together , and learn together , to improve our products.
48 hours working time to test the stability of our product before sending out.