15khz ultrasonic atomizing nozzle
Ultrasonic atomization has some specific characteristics that make it advantageous over other traditional mechanical methods, like pressure or gas-assisted systems, to generate sprays of very small droplets.In particular,the resulting droplet size distributions are very narrow, and the droplet diameter is essentially controlled only by the ultrasonic frequency.
*Blood Collection Tubes
*Hydrogen Fuel Cells
*Solar Cells Coatings
*Float & Panel Glass
*Ultrasonic Spray Pyrolysis
*Compatible with ALL fluxes.
*Easily retrofits into all major selective solder machines.
*Reduced wasteful overspray and atmospheric contamination.
*Minimal servicing and downtime.
*Self-cleaning ultrasonic nozzle prevents clogging.
*Controlled - velocity will not harm or disturb components while giving maximum top side fill.
*Wide range of delivery rates Also ideal for tinning and odd-shaped components.
Shipping Term:By express,by air,by ocean and so on.
Leading Time:Quick production leading time and fast delivery.Usually 1-3days if we have in stock.
Q:I want to focus the mist on my board at a low speed, what kind of atomizer will you recommend?
A:We recommend the 50Khz long spray nozzle with compress air. Focusing type ultrasonic nozzle atomization shape is a small columnar shape, this type of ultrasonic nozzle spraying diameter range of 0.381 - 1.016mm. Usually we recommend this type of nozzle for low spray flow, low spray rate, and narrow spray.
Q:What is the result if i adopt wide type compress air?
A:Spray shape after aeration: divergence fan.The main use of high speed impact air jet control, air flow velocity controllable.
Q:What are the primary factors influence the initial droplet size?
The primary factors influencing the initial droplet size produced are frequency of vibration, surface tension, and viscosity of the liquid. Frequencies are commonly in the range of 20–180 kHz, beyond the range of human hearing, where the highest frequencies produce the smallest drop size.