What is ultrasonic cutting machine?
It is a kind of equipment that uses ultrasonic energy for cutting processing. Its biggest feature is that cutting does not use cutting edge.
The principle of the ultrasonic cutting machine is to melt the localized heat of the material to be cut by the energy of the ultrasonic wave, thereby achieving the purpose of cutting the material. Therefore, the ultrasonic cutting does not require a sharp cutting edge, nor does it require a large pressure, and does not cause chipping or breakage of the material to be cut. At the same time, since the cutting blade is subjected to ultrasonic vibration, the frictional resistance is particularly small, and the material to be cut is not easily adhered to the blade. This is especially effective for viscous and elastic materials, frozen materials such as foods, rubber materials, and inconvenient objects.
Ultrasonic cutting also has a great advantage, that is, it has a fusion at the cutting part while cutting, and the cutting part is perfectly sealed, which does not cause the textile material to flash.
The use of ultrasonic cutting machines can also be extended, such as digging holes, shovel digging, scraping paint, engraving and so on.
Similar to the cutters and cutting boards required for conventional cutting, ultrasonic cutting machines have two basic structures. According to the position of the ultrasonic application, it is divided into an ultrasonic cutter cutter and an ultrasonic cutter cutter.
The ultrasonic cutter cutter directly loads the ultrasonic energy onto the cutter, and the cutter becomes a cutter with ultrasonic waves. When cutting the material, the material is mainly softened and melted by the ultrasonic energy, and the cutting edge of the cutter only serves as the slit positioning, the ultrasonic energy output, and the separation material. This cutting method is suitable for cutting thick, thick, long, etc. materials that are inconvenient to set the cutting board. Such as raw rubber output from the rubber mixer, pipe cutting, frozen meat, candy, chocolate cutting, printed circuit boards, etc.
The basic structure of the ultrasonic cutting board cutter is similar to that of the ultrasonic cutter cutter, except that the ultrasonic output portion is not a cutter but a conventional ultrasonic plane mold. Here, the mold is equivalent to a cutting board. However, this is a cutting board that is used for ultrasonic vibration. The cutting knife is still traditional, but the sharpness of the cutting edge is reduced, and the life of the cutting knife is greatly extended. This cutting method is suitable for the cutting of flaky materials, such as clothing lace, fabric cutting, natural fibers, synthetic fibers, non-woven fabrics, synthetic resins, paper, film and the like.
Ultrasonic cutting machine It can be used in a single machine, portable, suitable for temporary cutting of a small amount of material. It can also be installed on the machine table, and the computer can control the cutting head to make X-Y-Z direction movement to form a fully automatic ultrasonic cutting device. Suitable for pipeline, cutting of batch materials.