The Main Materials By Ultrasonic Metal Welding Machine

The Main Materials By Ultrasonic Metal Welding Machine

Date:Jul 25, 2019

The Main Materials by Ultrasonic Metal Welding Machine

In theory, the ultrasonic metal welding machine is mainly applied to copper, aluminum, tin, nickel, gold, silver, molybdenum, stainless steel and other non-ferrous metal materials such as thin plates, thin rods, wires, sheets, belts and other materials for instant welding, the total thickness can be Up to 2-4mm . However, in fact, some hard metal welding machines are not welded at all. For example, gold, stainless steel and other materials are not currently welded by ultrasonic metal welding machines. Therefore, if such a material needs to be welded, the ultrasonic metal welding machine can be ignored.



Ultrasonic metal welding

The most common welding materials for ultrasonic metal welding machines are soft titanium metals such as copper, aluminum, nickel and silver. However, these materials’ welding area is also required, too large or too thick will not work. The advantages of ultrasonic metal welding machine are fast, energy saving, high fusion strength, good electrical conductivity, no spark, close to cold processing, and the welding effect is just right, which can make you very satisfied. Of course, the materials to be welded must not exceed the standard. If it is too large or too thick, it is definitely not guaranteed. In addition, tin plating on the surface of the copper sheet will affect the welding effect.


Previous: Introduction Of Ultrasonic Metal Welding Machine

Next: Ultrasonic Wire Harness Welding Machine Welding Action