Operation Specification Of Ultrasonic Plastic Welding Machine

Operation Specification Of Ultrasonic Plastic Welding Machine

Date:Oct 23, 2020

Operation specification of ultrasonic plastic welding machine

1. During operation (with load), the vibration meter of the ultrasonic plastic welding machine should not exceed the red zone (in the standard welding machine). If the indication exceeds, reduce the pressure, reduce the number of output segments, and adjust the sound wave adjustment

20k ultrasonic digital generator - RS232   (12)

2. There are high-voltage lines in the vibrator and vibrating machine of the ultrasonic plastic welding machine. Except for the adjustment of external operations, the user should not do the maintenance inside the machine. If there is too much water, the air compressor must be cleaned from time to time.

 

3.  The grounding wire must be grounded and not connected to the ground wire of the power supply to prevent high voltage leakage.

 

4. The vibrator and the expansion cone cannot rotate more than 360° to avoid twisting the high-voltage line.

 

5.  Do not place the ultrasonic plastic welding machine in a damp or dusty or overheated place. Do not place fluid objects on the top of the machine. Please be tidy and clean at any time, but do not use liquid cleaning.



Previous: Common Misunderstandings Of Ultrasonic Welding Machines

Next: How Does The Ultrasonic Homogenizer Work?