Lithium Ion Battery Tab

Lithium Ion Battery Tab

Date:Jul 24, 2019


Lithium Ion Battery Tab

The Battery tab is a raw material for lithium ion polymer battery products. For example, the mobile phone batteries used in our lives, Bluetooth batteries, laptop batteries, etc. need to use the ear. The battery is divided into positive and negative poles. The battery ear is the metal conductor that leads the positive and negative poles from the battery core. Generally speaking, the battery ears of the positive and negative poles of the battery are the contact points when charging and discharging. The battery ear is divided into three materials, the anode of the battery is made of aluminum (Al) material, the negative electrode is made of nickel (Ni) material, and the negative electrode is also made of nickel-plated nickel (Ni-Cu) material. They are all made up of two parts of film and metal strip to make.

The film is a part of the ear insulator, which prevents the short circuit between the metal strip and the aluminum plastic film when the battery is packaged, and is sealed with the aluminum plastic film by heating (about 140 ° C) leakage.


图片9

One of the tabs is sandwiched between two strips of metal tape. The films currently used in the market are black rubber, white glue and single layer glue. The commonly used black film is a three-layer structure: melanin, melting point 66 ° C; PE, melting point 105 ° C; PP, melting point 137 ° C. The finished product package of the ear is divided into a disc type (the whole metal strip is wound into a disc after passing the equipment plus the film) and a plate type (the metal strip is cut into a single piece after the film is attached, and then placed in a row with two A thin transparent plastic sheet is sandwiched in the middle).

“Polar” refers to the “pole” in “positive” and “negative”, and “ear” refers to the strip used in “positive” and “negative”, which is symmetrical on both sides of the metal strip like human “ear”. The combination of function and image is named. Taiwan refers to “battery tab” as the “guide”. Similar to this name, the “shoulder height” and “shoulder width” commonly used in the industry can be considered as the continuation of the “polar ear” name or Subdivision, because the "ear" is difficult to measure the height and width, and the "shoulder" can be, so the "shoulder height" and "shoulder width" were not named "ear height" and "ear width".

More precisely, the "battery tab" is a "connecting, conducting, sealing". “Connected” refers to the connection between the inside and outside of the battery, the connection between the battery tab rubber and the aluminum plastic film; “conducting” means that the electricity is led out through the tabs and the circuit is generated; “sealing” refers to the seal between the strip and the metal strip. The seal between the strip and the aluminum plastic film.

It is precisely because the "battery tab" is the localization in the true sense from the beginning, it is not a simple imitation (Sumitomo is the automatic hot-rolling type ear at the beginning, and the domestic is the manual plate type hot-pressing ear), high frequency The automatic roll type battery tab is also a true localization of the battery tab device. The
nanochemistry treatment of the surface of the ear metal band, especially the nanochemistry treatment of the surface of the nickel-nickel nickel tape, is the innovation of the domestic battery tab, which forces Sumitomo The battery tab has to learn from the domestic ear, although it is used, but the surface treatment of the metal strip has not been well solved. In this respect, there is still a certain gap compared with the domestic battery tab. The battery tab is commonly used to weld battery cells and current collectors with an ultrasonic welding machine.







Previous: Multi-strand Harness And 2mm Terminal Soldering

Next: Lithium Battery Aluminum Foil And Pure Aluminum Tab Welding