Copper Foil Copper Belt Ultrasonic Metal Welding Machine

Copper Foil Copper Belt Ultrasonic Metal Welding Machine

Date:Nov 27, 2019

The working principle of the copper foil copper belt ultrasonic welding machine: the high frequency vibration wave is transmitted to the two metal surfaces to be welded, and under the condition of pressure, the metal surfaces are rubbed together to form a fusion between the molecular layers, and the advantage is that Fast, energy-saving, high fusion strength, good electrical conductivity, good thermal conductivity, no spark, close to cold.

Copper foil copper belt ultrasonic welding machine: It is applied to the battery positive and negative ear welding, the terminal is welded in the wire harness, and the terminal and the terminal are welded. The capacitor is soldered to the positive and negative terminals. The sheet is welded on the sheet, the sheet is welded, the sheet is welded, the wire is welded, the wire is welded, and the wire is welded. The welding materials are copper, aluminum and nickel sheets.


Copper foil copper belt ultrasonic welding machine operation instructions:

First, the preparation work: 1. Check whether the machine parts are complete, configure the gas source, the gas source requirement is greater than or equal to 0.6MPa. The machine is equipped with: transmitter, machine, power cord four core, control line five core, transducer line two core, pedal line three core, determine whether the connection is correct when loading the machine.

2. Connect the power cable. There are three wires at one end of the power cable, which are L and N. One end four-pin socket is connected to the generator.

3. Plug in the air source, pass the pressure regulating valve and the air pressure gauge to ensure the air pressure is 0.2-0.6Mpa.

4. Connect the connection cable to the generator and the socket on the machine. Turn on the power button and the indicator light is on.

Copper foil copper belt ultrasonic welding machine: consists of three parts: machine, generator and acoustic resistance. The equipment is composed of a generator, a sound resistance component, a pneumatic system, a machine base and a bottom mold. (The acoustic resistance is composed of three parts: transducer, booster and welding horn.)


Previous: 2019 Ultrasonic Market Survey

Next: What Materials Are Mainly Welded By Ultrasonic Metal Welding Machine?