Automobile A-pillar Door Reinforcement Frame Plastic Parts Flattening Ultrasonic Welding Machine
Automobile A-pillar door reinforcement frame plastic parts flattening ultrasonic welding machine is to use ultrasonic welding technology to splicing automobile plastic parts. The multi-head ultrasonic welding machine is formed once, and the welding is carried out by using the ultrasonic welding head of the mother-child. The welding effect is stable and firm.
Automobile A-pillar door reinforcement frame plastic parts flattening ultrasonic welding machine is an ultrasonic non-standard equipment, according to the A-pillar, so the welding point is designed and processed. Simultaneous welding of the left and right parts of the A-pillar of the car through eight sets of ultrasonic systems can reduce production time and increase productivity. The ultrasonic mold of this equipment adopts the mother-child welding connection method, and one transducer has two welding heads, which has high requirements for the manufacture of the welding head, and the angle, frequency and shape design are all considered. . The welding bottom mold of the product is surface-sprayed to avoid scratching the surface of the product during welding and improve the welding quality. The machine is controlled by PLC. All kinds of welding parameters can be freely adjusted on the liquid crystal display to facilitate the welding of different products. The machine is fully automatic welding control. The workers only need to put and pick up the parts, which reduces the operation difficulty. According to the welding requirements of the product, the welding time of one product is generally within 1 minute, and the specific welding tempo can be adjusted according to the welding requirements.