Ultrasonic Metal Welding Ni-MH Battery Ni-MH Battery Nickel Mesh And Nickel Sheet Mutual Melting And Nickel Sheet Mutual Melting

Ultrasonic metal welding is a special method of using the mechanical vibration energy of ultrasonic frequency to connect the same or dissimilar metals. When the metal is ultrasonically welded, neither electric current nor high temperature heat source is applied to the workpiece. Under static pressure, the mechanical energy is converted into internal energy, deformation energy and limited temperature rise. The solid phase welding occurs when the two base materials reach the recrystallization temperature. Therefore, it effectively overcomes the splash and oxidation generated during resistance welding. Phenomenon. Ultrasonic metal welding machine can perform single-point welding, multi-point welding and short strip welding on thin wires or sheet materials of non-ferrous metals such as copper, silver, aluminum, and nickel. It can be widely used in SCR leads and fuse pieces. , Welding of electrical leads, lithium battery pole pieces and tabs

Ultrasonic metal welding Ni-MH battery Ni-MH battery nickel mesh and nickel sheet mutual melting and nickel sheet mutual melting

specification:

ModelHS-D2020AHS-D2030AHS-D2050A
Power2000W3000W5000W
Working air pressure0.05-0.9MPa0.05-0.9MPa0.05-0.9MPa
Frequency20kHz20kHz20kHz
Voltage220V220V380V
Weight55KGs60KGs88KGs
Working head Size550*280*380mm550*280*430mm550*380*660mm
Machine Size540*380*150mm540*380*150mm540*380*150mm

advantage:

The welding material does not melt, and the metal is not weak.

After welding, the conductivity is good, and the resistivity is extremely low or nearly zero.

Low requirements on the welding metal surface, both oxidation and electroplating can be welded.

The soldering time is short, without any flux, gas, or solder.

No sparks during welding, environmental protection and safety.

range:

Ni-MH battery Ni-MH battery nickel mesh and nickel sheet mutual fusion and nickel sheet mutual fusion. .

Lithium battery and polymer battery copper foil and nickel sheet are mutually fused, and aluminum foil and aluminum sheet are mutually fused. .

The wires are fused to each other, and one or more wires are fused together.

The wires are fused with famous electronic components, contacts and connectors.

Mutual melting of large heat sinks, heat exchange fins and honeycomb cores for famous household appliances and automotive products.

High current contacts such as electromagnetic switches and non-fuse switches, and mutual fusion of dissimilar metal sheets.

The sealing and cutting of the metal pipe can be water and airtight.

Workshop:

浩索_08

CE:

微信图片_20200904143227

Transportation:

微信图片_20200904143235

Payment allowance:

微信图片_20200904143249

Hot Tags: ultrasonic metal welding ni-mh battery ni-mh battery nickel mesh and nickel sheet mutual melting and nickel sheet mutual melting, China, manufacturers, suppliers, factory