Ultrasonic Metal Welding Machine For Welding Solar Water Heater Plate 20Khz

Ultrasonic Metal Welding Machine For Welding Solar Water Heater Plate 20Khz

High Power Metal Wire Ultrasonic Welding Machinets Principle of Ultrasonic Metal Welding: Ultrasonic metal welding uses high-frequency vibration waves to transmit to two metal surfaces to be welded. Under pressure, the two metal surfaces rub against each other to form a fusion between molecular...

Ultrasonic Metal Welding Machine For Welding Solar Water Heater Plate 20Khz




Description:

 

Altrasonic Ultrasonic welder for solar heat collecting plate is suitable for welding application like solar heat collecting plate (welding cooper tube and aluminum foil;cooper tube and cooper foil;welding multiple cooper tube of the whole plate), solar water heater (welding heat exchange tube onto the plate).

 


Specification:

 

Frequency                                                                20 Khz                                                                             
Output Power2000 W
Voltage220 V
SwitchHandle or foot switch
Power AdjustingStep or continuous
Working Time Control24 Hours
Weignt20-30 KG ( Determined by the size of the horn )
GeneratorDigital Generator
Welding speed10m / s
 


Principle:


Ultrasonic metal welding machine USES the principle of ultrasonic high frequency vibration to transform the ultrasonic vibration energy into friction energy and transfer the metal surface.Under conditions where heat is generated by friction and pressure is applied to the metal, the sheet will melt.


Applications:


Altrasonic ultrasonic weld system can be used for the aluminous model multiple tube production line, (on a board welding heat exchange tube) solar water heater, electric appliances, electric heat pipe welding aluminum and copper), corrugated aluminum processing, solar panels (welding copper tube and aluminum foil;Copper pipes and copper foil; Weld multiple copper pipes throughout the board.



Main Advantage:


1. Fast Heating: The minimum rate of heating is less than one second(rate of heating is available for adjustment and control)

 

2. Wide Coverage of Heating: It can be used to heat various metal parts (replace removable induction coil as per different shape).

 

3. Easy Installation: It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.

 

4. Easy Operation: You can learn to operate it within several minutes.

 

5. Fast start-up: It can be started to perform heating operation on condition that water and power supply is available.

 

6. Low Power Consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work pieces, the lower power consumption would be.

 

7. High Effectiveness: It has such features as uniform heating ( it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece ), fast warming and limited oxic horizon, and can gurad against any waste after annealing.

 

8. Comprehensive Protection: It has such functions as overvoltage, over-current, overheat and water shortage alarm indications as well as automatic control and protection.

 

9. Controllable Temperature: It is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.

 

10. Comprehensive Full Load Design: It can work continuously for 24 hours

 

11. Small Size And Light Weight: It has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space. Sound operational environment: it is favorable for environmental protection, conservation of energy and safety operation, which is free of any noise, exhaust gas and dust.

 

12. Elimination of High Voltage: it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety.

 



 

1(1)2(1)3(1)

Hot Tags: Ultrasonic Metal Welding Machine For Welding Solar Water Heater Plate 20Khz, China, manufacturers, suppliers, factory