Steel Materials Ultrasonic Welding Horn Different Sizes For Ultrasonic Welding Machine

Steel Materials Ultrasonic Welding Horn Different Sizes For Ultrasonic Welding Machine Introduction Commonly used ultrasonic mold materials are aluminum alloy, mold steel, and titanium alloy. Ultrasonic molds made of different materials are suitable for different occasions. The type of...

Steel Materials Ultrasonic Welding Horn Different Sizes For Ultrasonic Welding Machine

Introduction

Commonly used ultrasonic mold materials are aluminum alloy, mold steel, and titanium alloy. Ultrasonic molds made of different materials are suitable for different occasions. The type of ultrasonic mold used depends on the use occasion and use of the ultrasonic equipment. Make choices according to the situation. Different molds have different advantages.


Comparison

Ultrasonic titanium alloy mold:

The advantages are high hardness, good wear resistance, fast heat dissipation, lighter weight and low density. When the same power ultrasonic wave is transmitted, the ultrasonic transmission rate of the same volume mold is higher than that of the steel mold. It can be said that the titanium mold integrates many advantages of the steel mold and the aluminum mold. It is used in conjunction with the continuous vibration ultrasonic machine. It has high sturdiness, good thermal conductivity, high hardness, and long use time, but the cost is slightly more expensive.

Ultrasonic aluminum alloy mold:

Advantages: light weight and low density; high ultrasonic transmission rate, suitable for large-scale molds; low hardness, more complex lines can be carved on the mold, and the processing cost is relatively low. The disadvantage is that the wear resistance is not high and it is easy to wear. Therefore, the aluminum alloy ultrasonic mold is suitable for discontinuous high-strength friction operations such as stitching and welding, high ultrasonic wave strength, and engraving of the mold surface. It is suitable for aluminum alloy ultrasonic molds.

Ultrasonic steel mold:

Advantages: high hardness, high wear resistance, strong mold use time, and high stability. The disadvantage is that the ultrasonic transmission rate is relatively low and the acoustic impedance is large. In order to ensure the ultrasonic transmission effect, it is not suitable for the enlargement of the mold. In the case of the circular mold, the unit diameter generally cannot exceed 11.5cm. Ultrasonic steel mold is more suitable for all kinds of rolling cutting, such as non-woven fabric cutting, nylon material punching, slitting, fabric rolling lace, environmental bag sewing and other application equipment, such as ultrasonic mask machine, ultrasonic fabric slitting machine , Ultrasonic punching machine and many other equipments use steel molds.

IMG_0433

Transport and Packaging

浩索_13

Payment

付款方式

Hot Tags: steel materials ultrasonic welding horn different sizes for ultrasonic welding machine, China, manufacturers, suppliers, factory