China Fully Automatic One-to-two Plane Mask Machine Nonwoven Face Mask Machine Factory, Manufacturers and Suppliers

fully automatic one-to-two plane mask machine nonwoven face mask machine

Description:

The fully automatic one-to-two mask machine is connected with a mask machine and a conveying device. After being connected to the earband dissolving machine through the conveying device, the mask body machine will produce the product and then convey it to the conveyer after the machine is started On the device, after the mask is transferred from the transfer device to the 2 ear-band welding machines, the ear-band part is welded to complete a complete mask. The entire process realizes a fully automated production process without manual operation.

Technical Parameters:

(1) Equipment size: 7000mm (L) × 4500mm (W) × 1900mm (H) (excluding receiving line);

(2) Appearance color: international standard warm gray 1C (DB standard color), according to this standard without special instructions;

(3) Equipment weight: ≤5000kg, ground load ≤500KG / m2;

(4) Working power: equipment 220VAC ± 5 %, 50HZ, rated power about 9KW;

(5) Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L / min;

(6) Operating environment: temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness no less than 100,000)

(7) Production efficiency: 90-100PCS / MIN;

(8) Equipment production qualification rate: 99% (except when the incoming materials do not meet the requirements or the employees are improperly operated)

(9) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)

Production processes:

1.Hot pressing

2.Manufacture of outer masks

3.Welding trimming

4.Printed logo/mask standard

5.Breathing valve punch

6.Nose bridge welding

7.Artificial nasal bridge

8.Welding Ear Straps

9.Welding breathing valve