Auto Body Ultrasonic Riveting Welding

Definition of Ultrasonic Welding: The principle of ultrasonic welding is through the ultrasonic generator to convert high-frequency electrical energy into higher frequency mechanical movement, then mechanical movement through a set of amplitude can be changed to the transmission device to the...

Auto Body Ultrasonic Riveting Welding

IMG_9723 副本.jpg

IMG_9731 副本.jpg

The basic process of ultrasonic welding can be described by the following steps:

The parts to be welded are placed in the anvil or fixture.

The horn contacts the parts to be welded.

Pressure is applied to keep the horn in contact with the welded materials and to hold them together.

The horn delivers ultrasonic vibrations to heat up the materials. The vibrations move less than a millimeter either up-and-down or side-to-side.

The materials are welded together.

The horn gets retracted and the welded materials can be removed from the anvil.

The welding times, applied pressures and temperatures are controlled by a computer or microprocessor within the welding apparatus. And what actually happens during the welding process depends on the nature of the materials. In metals, the ultrasonic vibrations are delivered parallel to the plane of the materials. The frictional heat increases the temperature of the metal surfaces to about one third of the melting temperature, but does not melt the metals. Instead, the heat removes metal oxides and films from the surfaces. This allows the metal atoms to move between the two surfaces and form bonds that hold the metals together.


Q: What is the suitable frequency for ultrasonic welding?

A:Normally we adopt 35Khz,30Khz,20Khz,15Khz.We will recommend the suitable solution according to your application and materials.

Q:What is the frequency range of your ultrasonic welder?

A: We can produce from 15KHz-70KHz ultrasonic transducer, the power can be from 30w-6000w.You can inform us the frequency needed or your application, we will recommend the suitable frequency transducer for you.

Q: What are the main factors for ultrasonic welding?

A:The factors that vary in ultrasonic welding are the frequency of the sound waves (usually 20, 30 or 40 kHz), the pressure applied to hold the materials together, and the time over which the ultrasound is applied (fractions of a second to more than one second).

Hot Tags: auto body ultrasonic riveting welding, China, manufacturers, suppliers, factory