Ultrasonic Milling For Hard And Brittle Material

The time spent on ultrasonic machine entirely depends on the frequency of the vibrating tool. It also depends on the size of grains of the abrasive slurry, the rigidity and the viscosity as well. The grains used in the abrasive fluid are usually boron carbide or silicon carbide as they are rigid than others. The used abrasive can be carried away easily if the viscosity of the slurry fluid is less.

Ultrasonic Milling For Hard And Brittle Material


   

  

Specification

 

Frequency

20 Khz

Output Power

1000 W

Voltage

220 V

Switch

Handle or foot switch

Power Adjusting

Step or continuous

Working Time Control

24 Hours

Weignt

30 KG ( Determined by the size of the horn )

Generator

Digital Generator

 

Processing schematic 


ultrasnonic-machining-process

Applications


1. Various kinds of materials especially fragile rigid material.

2. Processing plane, groove, all kinds of form surface (such as spline, gear and thread) and special surface of mould.

3. Application area: machining industry, machine tool equipment manufacturing.

4. Application occasion: manufacturing enterprise, universities and colleges, scientific research institution, mechanical equipment transformation industry.


Product details 

ultrasonic assisted machining system (10)

ultrasonic assisted machining system (12)

 Packaging picture

ultrasonic assisted machining system BT50 or BT40 spindle type (3)

ultrasonic assisted machining system BT50 or BT40 spindle type (1)


Hot Tags: Ultrasonic Milling For Hard And Brittle Material, China, manufacturers, suppliers, factory