Ultrasonic Plastic Cutting Machine For Non-woven Fabric 30KHz
The purpose of ultrasonic cutting is to use the energy of ultrasonic transducer to heat and melt the part of the cut material so as to cut the material. Therefore, ultrasonic cutting does not require sharp edges, nor does it require a lot of pressure, and it will not cause edge breakage or damage of the material being cut. At the same time, because the cutter is doing ultrasonic vibration, friction resistance is very small, the material is not easy to be cut on the blade.This is especially effective for cutting viscous and elastic materials, such as video, rubber, etc., or objects that do not add pressure.
1.Fast speed, high efficiency and pollution-free
2.Appropriate amplitude and feeding speed can improve cutting quality
3.The key factors influencing the cutting tool are the knife angle, material, shape and thickness of cutting material.
1.Foam Core Sealant
3.Output Power: 200W
4.Generator Digital generator:, 452 x 180 x 100mm
6.Size of cutter: Blade replaceable
7.Length of cable: 3M
8.Outer skin: Aluminum
10.Voltage: 220V / 110V
11.Accessory Foot switch 1pc；Cut blade 2pcs；1.5mm special hex wrench 1pc；Screw M3×4L 2pcs
12.Material of blade: Titanium alloy, stainless steel