40K 800W Sealing And Cutting Equipment

With ultrasonic sealing, the heat required for melting is only generated inside the thermoplastic sealing layer. For localized conversion of vibrations to friction heat, the anvil or sonotrode profiles are mostly linear.

40K 800W Sealing And Cutting Equipment 

封切应用0副本66




Parameters


Frequency

30/40Khz

Power

500W 800W

Input

AC110-240V, 50/60Hz

Power Controller

stepping or continuous

Material Of Cutting Head

aluminum alloy, stainless steel, titanium alloy, alloy steel.      

Machine Wight

4 kg-16KG

Accessories

foot switch, additional blade

Cooling Device

compressed air mouth can be installed.

Cable Length

2M or customized

Foot Switch

available


Description

 

The applicable materials of ultrasonic wave sealing and cutting include: 100% of synthetic fiber, such as nylon, polyester, polypropylene, some polyethylene, modified acrylic resin, vinyl compounds, carbamate compounds, thin films, coated paper, etc. It also includes synthetic fibre mixing 35 to 50% of synthetic fiber composition.Ultrasonic can cut and sew at the same time, preventing the knitted or textile materials to be off-line. It has slot edge taper avoiding pilling. The application includes cutting, carpet ornaments, clothing labels, curtains, cable materials and industrial woven belt etc..

 

Advantage

 

▲ Dispensing with needle and thread,without the traditional line suture of bolt joint, but also on textiles orderly local shear and seal. The cementation strength is strong, achieving the waterproof effect and clear embossing.

▲ With special steel tool head, sealing the edges of the cracks, it does not hurt the cloth edge, and no burrs, edge phenomenon.

▲ Can be continuous operation without preheating.

▲ Simplely operation,normal sewing worker can operate

▲ Lower cost,the efficiency is higher nearly 5 to 6 times than traditional machine.

 

1

2

3

 

 



Hot Tags: 40k 800w sealing and cutting equipment, China, manufacturers, suppliers, factory