30K Ultrasonic Cutting Machine
The ultrasonic plastic cutting knife is directly loaded into the ultrasonic energy on the cutter, the cutter will become a knife with ultrasonic cutting. In cutting materials, the materials are mainly softened and melted by ultrasonic energy. The cutting edge of the cutter plays the role of slit positioning, ultrasonic energy output, and separation of materials.
Ultrasonic Cutters are small in size and do not require large installation areas. Special equipment is not required for the installation. Ultrasonic Cutters are small enough to be hand-held for many operations.
Thermo-plastics: plate, sheet, film and laminated material
Carbon fibers, natural fibers or Synthetic fibers
Composite material: polyethylene fibe, molded articles containing carbon or glass fibers
Rubber: vulcanized latex, non-vulcanized latex, sheeting material, and tube
Repair of printed circuit board copper foil
ABS、PP、PE ..... other organic plastic sheet less than 5mm
Automotive carpets and ceilings
Is continuous use possible?
When general ultrasound processing tools are continuously used for a long period of time, heat accumulates in the transducer and the jointing section of the blade and results in malfunction. Altrasonic’s transducer can be continuously used for a long period of time by supplying air for cooling