30kHz 500W Ultrasonic Manual Cutter For Cutting Vulcanized Rubber

30kHz 500W Ultrasonic Manual Cutter For Cutting Vulcanized Rubber

The principle of the ultrasonic cutting machine is completely different. It uses the energy of ultrasonic waves to heat and melt the material to be cut locally to achieve the purpose of cutting the material. Therefore, ultrasonic cutting does not require sharp edges or great pressure, and will not cause chipping or damage of the material being cut. At the same time, because the cutting blade is doing ultrasonic vibration, the friction resistance is particularly small, and the material to be cut is not easy to stick to the blade.

30kHz 500W Ultrasonic Manual Cutter For Cutting Vulcanized Rubber



Specification

Model

HSPC30

Frequency

30kHz

Output Power

500watt

Generator

Digital generator, 452 x 180 x 100mm

Handle

Φ44×220

Size of cutter

Blade replaceable

Length of cable

3M

Outer skin

Aluminum

Weight

11KG

Voltage

220V / 110V

Accessory

Foot switch1pc;
1.5mm special hex wrench 1pc;
Screw M3×4L 2pcs

Material of cutter

titanium alloy


The main parts:

Digital Generator

It can transfer the 50-60Hz electricity to high-power’s high-frequency (15kHz-100kHz) power supply, and then provide to the transducer.

Transducer

It can transfer high-frequency electricity energy to machine vibration energy.

Booster

It used to connect and fix the transducer and horn. When enlarge the transducer swing, it will carry to the horn.

Knife

It used to send the machine energy and pressure to the working matter.


Workshop

微信图片_20200421142331


Shipping


微信图片_20200421142324


Payment


微信图片_20200421142337

Hot Tags: 30khz 500w ultrasonic manual cutter for cutting vulcanized rubber, China, manufacturers, suppliers, factory

Previous: 40k 100w Manual Ultrasonic Cutting Machine For Non-woven Bag

Next: Robotic Ultrasonic Cutter With Smooth And Precise Edge For Plastic Deburring & Trimming