20kHz Ultrasonic Transducer with Welding Horn and Analog Generator
Mold type:Steel horn
Welding horn size:110*20mm;153*20mm;160*20mm;200*20mm
Analog generator: mature technology, simple operation, good follow-up maintenance
Characteristics of our system:
1. Adopt steel welding horn instead of aluminum, steel mold hardness is 62, can extend the service life
2. Continuous wave / indirect wave
3. Will be tested 3-4 times before shipment
The advantages of the transducer:
1.The transducer is assembled and debugd by an experienced master with more than 30 years of installation experience.
2.The impedance is very small, less than 7 ohms, which greatly reduces the heat and loss of the transducer;
3.The consistency of transducer parameters is very high, which provides convenience for customers to match ultrasonic power;
4.Large output amplitude, greater than or equal to 10 microns;
5.Energy conversion rate is greater than 95%;
6.The testing process is very rigorous and the aging time should be at least one week to ensure the stability of transducer parameters.