15Khz 2600w Ultrasonic Welding System With Analog Generator+Flange+Horn200*25mm
Dia of ceramic: 60mm
Qty of ceramic: 4pcs
Horn size: 200*25
15khz 2600w ultrasonic welding system: Ultrasonic energy is transmitted to the welding zone through the upper weldment. Due to the large acoustic resistance at the interface between the two welds, local high temperature will be generated. Due to the poor heat resistance of the plastic, it can not be distributed in time, and it gathers in the welding area. When the ultrasonic wave stops acting, the pressure is sustained, and there is a little pressure holding time, solidification and molding, so that a strong molecular chain is formed to achieve the purpose of welding , The welding strength can be close to the original body strength.
1. New improvements and more optimized performance;
2. Steel mold horn, strong and durable;
3. Frequency modulation and frequency automatic compensation circuit;
4. High welding efficiency and low defect rate.